i5250V Scanner

150 ppm (200 and 300 dpi for bitonal and color)

KOFAX OEM VRS Professional Software

No limit with i5000 Series Scanners

CCD

600 dpi

100 / 150 / 200 / 240 / 300 / 400 / 500 / 600 dpi

White LEDs

304.8 mm (12 in.)

Up to 1 m (40 in.)

63.5 mm x 63.5 mm (2.5 in. x 2.5 in.)

With standard feeder: 45 g/m2 (12 lb.) bond to 200 g/m2 (110 lb.) index
With ultra-lightweight feeder accessory: 25 g/m2 (7 lb.) rice paper to 80 g/m2 (20 lb.) bond

Automatic 750-sheet elevator design; automatic document feeder with four settings: continuous feed, 100-sheet, 250-sheet, 500-sheet and full 750-sheet batches

5 independent ultrasonic zones

USB 2.0 Certified, USB 3.0 Compatible

Standard Software - WINDOWS bundled software: TWAIN, ISIS, WIA Drivers; Kofax certified.

Optional Software: Alaris Capture Pro Software, Alaris Info Input Solution (Windows only), Asset Management Software

Rear exit, digital printing, staple detection, image merge, rear side printer, intelligent imprinting (hardware patch counting), controlled stacking, automatic color detection, autocrop, deskew, content-based blank page detection and deletion, automatic orientation now with defaults, color on the fly toggle patch, operator overrides, interactive multi-feed host view, intelligent document protection

CCITT Group IV; JPEG or uncompressed output

100-240 V (international), 50/60 Hz

Running < 205 watts
Standby: < 1.0 watt

EPEAT Registered
ENERGY STAR qualified scanners, 2008 EuP

Acoustical Noise
(operator position sound pressure level)

Standby mode: <39 dB(A); Scanning at 300 dpi <56 dB(A)

i5250V/i5650V: PC: INTEL QUAD CORE i5 (Ivy Bridge or newer), running at 3.0 GHz or higher; USB port 3.0 (super speed) or 2.0 (High Speed); 4 GB RAM or more;

Feeder consumables kits, imaging guide set, printer ink cartridge and carrier, transport cleaning sheets, roller cleaning pads, printer ink blotters, STATICIDE Wipes, switchable black/white background

i5250/i5250V/i5650/i5650V/i5850: Enhanced Printer Accessory for Kodak Scanners (front pre-scan and rear post-scan), Lead Edge Alignment exit tray, i5200 to i5600 upgrade, manual feed shelf, Document Extenders 66.04 cm, 76.02 cm and 86.36 cm (26 in., 30 in. and 34 in.) Kodak Legal Size Flatbed Accessory and the Kodak A3 Flatbed Accessory are available to support all models

Height: 43.4 cm (17.1 in.)
Width: 69.3 cm (27.3 in.)
Depth: 51 cm (20.1 in.) with tray closed, 65.3 cm (25.7 in.) with tray open

57.6 kg (127 lbs.)

 

Operating System Compatibility Definitions

Supported Operating Systems

• WINDOWS 10 (32-bit and 64-bit)
• WINDOWS 8 (32-bit and 64-bit)
• WINDOWS 7 (32-bit and 64-bit)
• WINDOWS XP (TWAIN only) (customer validated – not supported by Kodak Alaris because Microsoft discontinued support in 2014)

 

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.