i5250 Scanner

150 pages per minute/300 images per minute (200 and 300 dpi for bitonal and color with all imaging features turned on)

No limit with i5000 Series Scanners

CCD

600 dpi

100 / 150 / 200 / 240 / 300 / 400 / 600 dpi

White LEDs

304.8 mm (12 in.)

Up to 4.6 m (180 in.)

63.5 mm x 63.5 mm (2.5 in. x 2.5 in.)

With standard feeder: 45 g/m2 (12 lb.) bond to 200 g/m2 (110 lb.) index
With ultra-lightweight feeder accessory: 25 g/m2 (7 lb.) rice paper to 80 g/m2 (20 lb.) bond

Automatic 750-sheet elevator design; automatic document feeder with four settings: continuous feed, 100-sheet, 250-sheet, 500-sheet and full 750-sheet batches

5 independent ultrasonic zones

USB 2.0 Certified, USB 3.0 compatible

Standard Software - WINDOWS bundled software: TWAIN, ISIS, WIA Drivers; Kofax certified

Perfect Page Technology, barcode reading in the scanner, rear exit, enhanced jam recovery, digital printing, staple detection, image merge, rear side printer, Intelligent Imprinting (hardware patch counting), streak filter, controlled stacking, iThresholding, automatic color detection, autocrop, aggressive crop, deskew, content-based blank page detection and deletion, multi-color dropout, dual-stream scanning, automatic orientation now with defaults, color on the fly toggle patch, operator overrides, Interactive multi-feed host view, Intelligent Document Protection

CCITT Group IV; JPEG or uncompressed output

100-240 V (international), 50/60 Hz

Sleep mode: < 3.5 watts
Running: < 215 watts
Standby: < 0.5 watts

EPEAT Registered
ENERGY STAR qualified scanners, 2008 EuP

Acoustical Noise
(operator position sound pressure level)

Standby mode: < 39 dB(A); Scanning at 300 dpi < 56 dB(A)

INTEL CORE i5 (Sandy Bridge or newer), running at 2.7 GHz or higher; USB port 3.0 (super speed) or 2.0 (high speed); 4 GB RAM or more

Feeder consumables kits, imaging guide set, printer ink cartridge and carrier, transport cleaning sheets, roller cleaning pads, printer ink blotters, STATICIDE Wipes, switchable black/white background

Enhanced Printer Accessory for KODAK Scanners (front pre-scan and rear post scan), i5200 to i5600 upgrade, manual feed shelf, Document Extenders 66.04 cm, 76.02 cm, and 86.36 cm (26 in., 30 in. and 34 in.), KODAK Legal Size Flatbed Accessory, KODAK A3 Size Flatbed Accessory

Height: 43.4 cm (17.1 in.)
Width: 69.3 cm (27.3 in.)
Depth: 51 cm (20.1 in.) with tray closed, 65.3 cm (25.7 in.) with tray

57.6 kg (127 lbs.)

 

Operating System Compatibility Definitions

Supported Operating Systems

• WINDOWS 7 (32-bit and 64-bit)
• WINDOWS 8 (32-bit and 64-bit)
• WINDOWS 10 (32-bit and 64-bit)
• WINDOWS XP (TWAIN only) (customer validated – not supported by Alaris because Microsoft discontinued support in 2014)

 

Protecting Customer Information - KODAK Scanners process scanned data exclusively through volatile memory ensuring image data is effectively erased upon shut down.

This scanner contains non-volatile storage (NVRAM), and volatile memory (SDRAM).

Volatile memory is used to store customer image data. It is erased when the device is turned off.

Non-volatile memory is used to store program data, scanner settings, and scanner calibration data. No customer image data is stored in non-volatile memory.

The only scanner settings stored permanently are the Energy Star settings. No other customer data is stored in the non-volatile memory.

NOTE: The image data is passed to a PC which has its own ability to store images and information. The customer will also need to consider what precautions must be taken to secure the data on the PC.